Microwave keeps tripping breaker? It can be frustrating to deal with a microwave that frequently trips the breaker. Not only does it interrupt your cooking, but it can also be dangerous if left unchecked. If you’re experiencing this issue, there are a few things you can do to troubleshoot and solve the problem.
This article will provide you with common reason why and easy-peasy solutions to help tackle this frequent problem. Get cookin’ all yer fave dishes and nibbles again!
Why Microwave Keeps Tripping Breaker?
Microwaves are an essential part of almost every kitchen today, and we rely on them to heat our food quickly and conveniently.
However, many homeowners have experienced the frustration of their microwave tripping their breaker, causing it to shut down completely. Check also: Oven Smells like Gas When Preheating
This problem not only disrupts your cooking process but also poses a safety hazard if left unchecked. Here are some reason why your Microwave keeps tripping breaker:
Overloading is a common issue faced by many households that use microwave ovens. Overloading occurs when too much power is being drawn from the circuit, causing it to trip the breaker.
One of the main causes of overloading is using an extension cord or power strip for your microwave. These devices are not designed to handle high-powered appliances and can easily become overloaded.
Additionally, using other high-powered appliances like Kenmore refrigerator not cooling, Conair steamer not working at the same time as your microwave oven can lead to overloading and tripped breakers.
2. Faulty Microwave
One common cause is when the magnetron, which generates the microwaves that cook your food, becomes damaged or defective. Other possible causes include short circuits in the wiring or faulty electrical components within the appliance itself. It’s important to address these issues promptly so as not to exacerbate any potential safety hazards.
If you suspect that your microwave is causing repeated circuit breaker trips, it’s best to consult with an experienced repair professional who can diagnose and fix the issue safely and efficiently.
3. Faulty Breaker
If you have a microwave that keeps tripping the breaker, it could be due to a faulty breaker. A circuit breaker is an essential component of your home’s electrical system, and it’s responsible for protecting your appliances from power overloads.
When an appliance like a microwave draws too much power or there’s a short circuit, the breaker trips to prevent damage.
However, if the breaker itself is faulty, it may trip even when there isn’t an overload or short circuit. This can cause frustration and inconvenience as you constantly reset the breaker every time you use your microwave.
In some cases, a faulty breaker can also pose a safety hazard by failing to trip when necessary and causing overheating or fire.
4. Electrical Wiring
One possible cause for this issue could be an electrical wiring problem. When your microwave keeps tripping the breaker, it could be a sign that there is something wrong with your electrical wiring.
If you have an older home or apartment, faulty wiring may be to blame for your microwave continually tripping the circuit breaker. Poorly insulated or outdated wiring can struggle to handle modern appliance demands and lead to overloading of circuits.
Similarly, if you recently added new appliances to your kitchen or upgraded your
microwave oven, it may be time to upgrade your electrical system as well.
How Fix Microwave Keeps Tripping Breaker
Here are some tips on fixing microwave keeps tripping your breaker:
1. Move the microwave to a different circuit
Microwaves require a lot of power to operate, and if other appliances are also using the same circuit, it can cause an overload and trip the breaker. Moving your microwave to a different circuit that isn’t being overloaded will prevent this from happening.
To do this, simply find another outlet in your kitchen or nearby area that is on a different circuit than where your microwave is currently plugged in. Make sure that it’s not being used by any other high-powered appliances such as refrigerators or ovens.
2. Check the power cord and outlet
The first thing to check is the power cord. Make sure it’s not damaged or frayed anywhere along its length. If you notice any damage, it’s best to replace the entire cord rather than trying to repair it yourself. Look for any signs of wear or tear around where the cord connects to the microwave as well as where it plugs into the wall outlet.
Next, check the outlet itself. Is it loose? Are there any signs of damage or discoloration on either end of the prongs? If so, try plugging something else into that same outlet to see if that device operates normally.
3. Inspect the microwave
Firstly, unplug the appliance from the power source and leave it for about 10 minutes before plugging it back in. This allows any electrical charge to dissipate and resets the system.
If this doesn’t work, check if there’s any visible damage to the cord or plug. A frayed cord or plug could be causing a short circuit leading to frequent tripping of breakers.
Another possible cause could be an overload on the same circuit as your microwave. Try unplugging other appliances which share that circuit and see if that resolves the problem.
4. Upgrade the electrical circuit
Upgrading your electrical circuit involves installing new wiring and breakers designed to handle the demands of modern appliances like microwaves. This will not only prevent your microwave from tripping the breaker but also improve safety by reducing the risk of electrical fires caused by overloading circuits.
It’s important to hire a licensed electrician for this job as they have the necessary skills and knowledge to complete it safely and efficiently.
Microwave Keeps Tripping Breaker All of a Sudden
If your microwave is tripping your breaker, it could be caused by either a broken component or too much electricity. Start by doing basic troubleshooting like checking power cords and resetting breakers. If these don’t work, call an electrician for help.
Sometimes an internal component, like a magnetron or transformer, can be damaged from too much current. Replace these with ones that work with your model. Or, if the breaker is supplying too much voltage, have an electrician reset or upgrade your breaker box.
Lastly, if you can’t fix it, consider replacing your microwave. This will get rid of risks from a malfunctioning appliance.
Microwave Trips Breaker After 2 Minutes
If a microwave trips the breaker after two minutes, it’s likely due to a hardware issue. If it trips right away, there could be an issue with the electrical system. Take steps to find the cause and act accordingly.
The most common problem is too many kitchen appliances running at once or the microwave has reached its capacity. Check if other appliances are running while the microwave is in use or unplug them all.
If other appliances are being used, unplug some before using the microwave. It could also be a wiring issue in the home. Consult an electrician if this is the case.
If nothing helps, the internal appliance could be faulty. A fan motor might need replacing or repair. Ask an experienced repair service for help.
To quickly diagnose and fix the issue, check all wiring for breaks or fraying insulation.
Inspect the fan motor for dust and carbon deposits. Test the touchpads and printed circuit boards. Measure resistance and capacitance levels in the transformer, capacitor and diode with an ohmmeter.
Use a voltage meter to test outlets and electrical connections. Lastly, check if the interior lights are working; replace any malfunctioning component.
Why Microwave Tripping Breaker when Opening Door
A common issue with microwaves is when the breaker trips when you open the door. Usually, this means a minor malfunction like a faulty switch that doesn’t turn it off. But, sometimes it’s a bigger problem that could be dangerous. Here are some reasons why your microwave might trip the breaker:
- Faulty wiring – Loose or worn wiring could cause electricity to go where it shouldn’t. Also, exposed wiring near the microwave is a problem.
- Bad connection – The connection between the microwave and power source could be frayed or worn out. This lets current leak and trips the breaker.
- Overloaded circuit – Microwaves need their own circuit. If other appliances share the same circuit, it overloads and trips the breaker.
To fix it, unplug the microwave and clear out any food or debris. Unscrew the outer cabinet and push aside insulation. Inspect each wire for damage, and tape any frayed or loose ones together.
Next, use a voltage meter or multi-meter to test each connection in both open and closed positions of the door. If no change occurs, replace any components within the control module such as switches or buttons that could be causing the problem.
Reassemble the microwave with manufacturer recommended screws, and make sure they’re sealed with caulk. Plug back in, and check the wiring for safety. Finally, test it again to make sure you fixed the broken module!
GE Microwave Keeps Tripping Breaker
Are you having trouble with your GE microwave tripping the breaker? There are a few possible causes and solutions. Here’s what to do:
- Check for loose connections in the outlet. Turn off the power, remove any plugs, and look for fraying or corrosion. Repair or replace them if necessary.
- Make sure nothing else is running on the same circuit. If something else is connected, it may be causing an overload. Try turning everything off and see if this solves the issue.
- Check for clogs or inadequate ventilation in the kitchen. Clogs can cause overheating and tripping breakers. Check inside and outside the microwave for blockages and remove them.
- Make sure there is nothing blocking airflow over the coils on top of the oven. Vents need air circulation to work properly. Check the vents for dust or debris and make sure they are clear.
- Take apart the microwave’s components one at a time and inspect each. If all else fails, there may be an internal component malfunction. Take note of where each component goes in case something needs replacing. Consult the manufacturer’s manual before starting.
Can a bad magnetron trip a breaker?
A bad magnetron can cause many problems in a microwave. It’s the key part of the machine, making microwaves that cook the food. If it fails, it can trip a breaker.
The magnetron may overwork to produce microwaves, drawing more power from the outlet and this causes the breaker to trip. It’s possible for other components to be damaged even if they aren’t to blame.
If you think the magnetron is failing, call a professional electrician or repair service. They can check the unit for repairs and make sure you and the appliance are safe.
What is the recommended breaker for a microwave?
When powering a microwave, it’s essential to use the right breaker type. Most microwaves need a 15-amp, 120-volt circuit breaker. It’s best to use a dedicated circuit breaker for the microwave, so that it can operate without competing for electrical power with other appliances.
To figure out the right amperage for your microwave, check the owner’s manual or contact the manufacturer. They’ll tell you the size and type of circuit breaker that works best.
How long should a microwave last?
On average, their lifespan is 10 years. As a rule of thumb, if it’s older than 8 years, look for a new one. To extend its life, maintain it properly. Clean the inside with warm, soapy water to prevent any buildup. If it’s having power issues or tripping breakers often, have an appliance service technician examine the inner parts or wiring.
Should a microwave be on its own breaker?
It’s not a must to have a seperate breaker for a microwave, but highly recommended. If it’s drawing too much power or has a fault then the new breaker can save you time and cash.
If the breaker keeps tripping and other appliances are on the same circuit, then something in the microwave is using too much current. Check if other appliances are using the same circuit. If so, move them to another. Or hire an electrician to assess what could be causing issues.
Does a microwave need to be grounded?
Most modern microwaves come with a three-prong plug. This provides ground and is important to use the correct outlet. But, if two-prong outlets are all you have, it’s safer to ground your microwave than not.
If unsure, get advice from an electrician or qualified pro. They can check if a ground is present. They can also tell you the best way to ground the appliance.
Alternatively, install a smart outlet designed for ungrounded appliances like microwaves. This protects against overloading circuit breakers, using existing wiring.
“There is no real ending. It’s just the place where you stop the story.”